Tools needed
- Drill/driver
- Stud finder
- Level
- Socket set
Materials needed
- Retractable garden hose reel
- Masonry lag shields (for brick)
- Lag screws (included)
Step-by-step
- 1
Pick a spot near the spigot within the reel's lead-hose reach.
- 2
Locate studs, or plan masonry anchors for brick/block walls.
- 3
Hold the mounting bracket level and mark the holes.
- 4
Drill and set lag shields in masonry, or drive lags into studs.
- 5
Bolt the bracket, then hang the reel box and confirm it pivots freely.
- 6
Connect the lead hose to the spigot and test extend, lock, and auto-retract.
Common mistakes
- • Mounting into drywall alone — the reel will rip out
- • Hanging it out of the lead hose's reach of the spigot
- • Letting the hose snap back hard on retract
Maintenance & next steps
Drain and bring the reel indoors (or insulate the spigot) before a hard freeze.
When to call a professional
For mounting on failing siding/masonry or where no solid framing exists.
Editor's note: This is instructional content for How to Mount an Outdoor Retractable Hose Reel Box. Replace with your own firsthand experience and photos before publishing.
This page contains affiliate links. If you purchase through them, we may earn a commission at no additional cost to you.
